Heat pump CSRS50
Product description
Heat pump “water-water”. CSRS series.
1. Large LED display control panel, easily read and operation
2. Scroll compressor
3. Compact in size with a built-in water tank up to 180L
4. Soft starter in protection of your residential power network
5. Electrical additional heating up to 9kw
6. Electricity saving mode by timer setting
7. Heating with temperature compensation curve by outdoor sensor
8. Visible alarming signal
9. Low noise (compressor packed with thick insulation material)
10. Free cooling function
11. Heating water pump and brine pump are the standard outfits
12. GSM remote control (optional)
13. 220v,single phase available
14. Zero maintenance after installation
Technical Specifications
|
Model |
CSRS 50N3 | ||||
| Cooling/Heating capacity (KW) | 56.8 | ||||
| Cooling/Heating capacity input power (KW) | 13.8 | ||||
| Power supply | 3N～400V50Hz | ||||
| Type of compressor | Scroll | ||||
| Quantity of compressor | 2 | ||||
| Cut-off value gas pressure HP (MPa) | 2.9 | ||||
| Cut-off value suction pressure LP (MPa) | 0.15 | ||||
| Type of refrigerant | R407C | ||||
| Volume (kg) | 15 | ||||
| Brine System | |||||
| Brine flow (nominal) (l/s) |
2.4 |
||||
| Available External Pressure (kPa) |
55 |
||||
|
Connection of Brine (mm) |
50 |
||||
| Heat exchanger | Stainless steel plate heat-exchanger | ||||
|
Max pressure brine system (MPa) |
0.3 |
||||
| Operating temp. brine system (℃) |
-5 to 25 |
||||
| Heating System | |||||
| Heating medium flow(nominal) (l/s) |
1.7 |
||||
| Available External Pressure (kPa) |
40 |
||||
| Connection of Heating (mm) |
50 |
||||
| Heat exchanger | Stainless steel plate heat-exchanger | ||||
| Max temperature heating medium (℃) |
55 |
||||
| Connection of hot water (Cu) |
50 |
||||
| Others | |||||
| Controller | Programmable intelligent controller with graphic displayer | ||||
| Noise dB(A) |
56 |
||||
| Enclosure class | IPX1 | ||||
| Net weight (kg) |
400 |
||||
| Size(L*D*H) (mm) |
1250×1000×800 |
||||
